Plate Mounting Washer
- Plate Mounting Washer
Not Sold in Pairs. This is a single washer
Plate Mounting Nut
- Plate Mounting Nut
Not Sold in Pairs. This is a single nut
Toe Stop Washer
- Toe Stop Split Ring Washer
Not Sold in Pairs. This is a single washer
Pilot Bottom Cushion Cup
- Bottom Cushion Cup Washer
- For use on Pilot Falcon, Falcon Plus, Viper Nylon and Viper Alloy quad plates or with Bionic Cushions.
Not Sold in Pairs. This is a single washer
Pilot Top Cushion Cup
- Top Cushion Cup Washer
- For use on Pilot Falcon, Falcon Plus, Viper Nylon and Viper Alloy quad plates or with Bionic Cushions.
Not Sold in Pairs. This is a single washer
Pilot Toe Stop Screw
- 5mm Slot
- Pilot Falcon, Falcon Plus and Viper Alloy toe stop screw.
Not sold in Pairs. This is a single screw.
Toe Stop Nut
- 15/16" Toe Stop Nut
Not sold in Pairs. This is a single nut.
Pilot Falcon Adjustable Nut
- Pivot Pin / Ball Stud Nut
- For use on Pilot Falcon, Falcon Plus and Viper Alloy Plus quad plates.
Not sold in Pairs. This is a single nut/ Pin.
Pilot Nylon King Pin
- Steel Kingpin
- For use on Viper Nylon Quad Plates.
Not sold in Pairs. This is a single Kingpin.
Pilot Pivot Cup
- Pivot Cup
- For use on Pilot Falcon, Falcon Plus and Viper Alloy Plus quad plates.
Not sold in Pairs. This is a single cup.
Axle Lock Nuts
- 8mm or 7mm Lock Nuts
- Set of 8 Lock Nuts
These Lock Nuts do not included plastic thread lock or lock tight. For thread lock axle nuts see Threaded Lock Nut Set.
Phillips Head Mouting Hardware
- Phillips head for easy install/removal
- 8 - 35mm screws
- 4 - 69mm screws
- 12 - washers
- 12 - nuts
This is a complete kit to mount two plates to two boots.
Pilot Kingpin Nut
- Micro-adjustable Kingpin nut
- For use on Pilot Falcon, Falcon Plus and Viper Alloy Plus quad plates.
Not sold in Pairs. This is a single Kingpin nut.
Pilot Pivot Pin
- Pivot Pin / Ball Stud
- For use on Pilot Falcon, Falcon Plus and Viper Alloy Plus quad plates.
Not sold in Pairs. This is a single Stud / Pin.
Atom Waxed Laces
High-quality waxed skate boot laces available in 3 lengths
- 54" (Boot Sizes 1-4)
- 60" (Boot Sizes 5-8)
- 66" (Boot Sizes 9-12)
Atom Wheel Bag
- Nylon outer shell
- Heavy-duty zipper
- Holds 8 quad skate wheels
- L*W*H: 5.5*5.5*3.9"
Atom Inline Wheel Bag
- 110mm wheels and smaller (Black Wheel Bag)
- 125mm (Green Wheel Bag)
Atom Wrist Guards
- High-density foam to absorb impact.
- Lightweight and breathable.
- Adjustable Velcro straps.
- Hand wash and dry.
- Can wear your fitness watch with this one
Pilot Aluminum King Pin
- Alloy Kingpin
- For use on Pilot Falcon, Falcon Plus and Viper Alloy quad plates.
Not sold in Pairs. This is a single Kingpin.
Pilot One Piece Truck
- One-Piece Cast Truck
- For use on Falcon, Viper Nylon and Viper Alloy Quad Plates.
Not sold in Pairs. This is a single roller skate truck.
Bionic Super Toe Stops
Toe Stop Features:
- 30mm stem length
- 45mm footprint
- American Imperial Standard Thread
Atom Snap
- Technology: Hollow Core Technology
- Size: 60mm x 40mm
- Hardness: 91A (Blue, Green, Pink, Black) / 95A(Orange, Purple, Red, Yellow)
- Use: Indoor
- Surfaces: Wood, Indoor Concrete
- Sold in 4 packs and need bearings
- Bearings are not included
Wheels are sold as a set of four wheels. Bearings are not included.
Bionic Bigfoot Toe Stops
Toe Stop Features:
- 59mm footprint
- Angled to prevent wheels from touching (guaranteed up to 66mm)
- Pre-angled bottom (zero break-in period)
- 30mm stem
- 5/8” Stem
- American Imperial Standard Thread
(Not recommended for outdoor or abrasive surfaces such as asphalt/cement.)
Luigino Barefoot Booties
- Neoprene outer with a soft absorbing inner
- 2mm allows a more snug fitting boot
- Excellent barefoot replacement
- Improved comfort
- Reduced blisters (for some eliminate altogether)
- Easier Break-in on new boots
- Better longevity of your boots (vs. using barefoot)
- Increased performance over socks
Pilot Two Piece Truck
- Two-Piece Forged Truck
- For use on Falcon, Viper Nylon and Viper Alloy Quad Plates
Not sold in Pairs. This is a single roller skate truck.
Dose not include Ball Stud or nut. To Upgrade your plate set up you will need to purchase a Complete Truck Set.