Bearing Cleaning Bottle
The best tool for cleaning your bearings! Need advice on what else to use or what else you need? Just contact us and we'll be happy to give you some recommendations!
$17.95
Add to cart
Bionic Super Toe Stops
Toe Stop Features:
- 30mm stem length
- 45mm footprint
- American Imperial Standard Thread
$18.00
Add to cart
Bionic Bigfoot Toe Stops
Toe Stop Features:
- 59mm footprint
- Angled to prevent wheels from touching (guaranteed up to 66mm)
- Pre-angled bottom (zero break-in period)
- 30mm stem
- 5/8” Stem
- American Imperial Standard Thread
(Not recommended for outdoor or abrasive surfaces such as asphalt/cement.)
$20.00
Add to cart
Bionic Cushions
Toe Stop Features:
- Hardness: Blue 83A, Red 88A, Yellow 93A
- Conical Top
- Barrel Bottom
- King Pin Hole diameter: 9.5mm
$20.00
Select optionsThis product has multiple variants. The options may be chosen on the product page
Out of stock
Moxi Twinkle Toe Caps
- Drum-dyed vinyl toe caps
$20.00
Select optionsThis product has multiple variants. The options may be chosen on the product page
Powerdyne Y3 Skate Tool
- 1/2" socket for axle nuts
- 9/16" socket for kingpin locknuts
- 15/16" wrench for toe stop locknuts
$20.00
Add to cart
SCSS Boot Covers
Hand made, beautiful style. These are not your made in bulk roller skate boot covers. These are made by hand in store! They fit approximately size 3-12. If you're trying to match a color to a skate outfit, send us a picture and we'll be happy to help you pick!
Luigino Barefoot Booties
- Neoprene outer with a soft absorbing inner
- 2mm allows a more snug fitting boot
- Excellent barefoot replacement
- Improved comfort
- Reduced blisters (for some eliminate altogether)
- Easier Break-in on new boots
- Better longevity of your boots (vs. using barefoot)
- Increased performance over socks
$24.95
Select optionsThis product has multiple variants. The options may be chosen on the product page
Pilot Two Piece Truck
- Two-Piece Forged Truck
- For use on Falcon, Viper Nylon and Viper Alloy Quad Plates
Not sold in Pairs. This is a single roller skate truck.
Dose not include Ball Stud or nut. To Upgrade your plate set up you will need to purchase a Complete Truck Set.
$25.00
Add to cart
Bont Suede Toe Caps
- Material: Australian leather
- Fit: Any Toe Stop Stem
- Sold as One Pair: 2 Guards
$25.00
Select optionsThis product has multiple variants. The options may be chosen on the product page
Bont Toe Caps
- Material: Australian leather
- Fit: Any Toe Stop Stem
- Sold as One Pair: 2 Guards
$25.00
Select optionsThis product has multiple variants. The options may be chosen on the product page
Moxi Brake Petals
- 45mm diameter
- 22mm stem length
$25.00
Select optionsThis product has multiple variants. The options may be chosen on the product page
Powerdyne Y4 Skate Tool
- 5mm Allen wrench for toe stop set screws
- 1/2" socket for axle nuts
- 9/16" socket for kingpin locknuts
- 11/16" socket for truck adjustment locknuts
$25.00
Add to cart
Riedell Pro Toe Cap
- Made from full-grain leather
- Covers entire toe and bottom half of laces for maximum scuff protection
- Fits all Riedell boot models and most Low cut Skate boots
$30.00
Select optionsThis product has multiple variants. The options may be chosen on the product page
Riedell Toe Cap
- Made from full-grain leather
- Covers entire toe for maximum protection
- Fits all Riedell boot models and most Low cut Skate boots
$25.00
Select optionsThis product has multiple variants. The options may be chosen on the product page
Gumball Toe Stops Long Stem
Toe Stop Features:
- 54mm footprint
- Non-marking, grippy natural rubber 75A Indoor or 83A Outdoor
- Pre-angled bottom (zero break-in period)
- 26 mm long stem or 10mm short Stem
- Hollow forged aluminum stem
- Molded safety line indicates when rubber is nearly worn down to the stem
- American Imperial Standard Thread
$25.00
Select optionsThis product has multiple variants. The options may be chosen on the product page
Bionic ABEC 7 Bearings
- Bearing Type: 608 8mm
- Dimension: 8mm core, 22 outer diameter, 7mm width
- Protection: ZZ
- Cage: SPCC 08F
- Quality: Bearing steel GCr15
- Ball complement: 7 pieces
- Ball Material: Steel
$29.95
Add to cart
Pilot Complete Truck Set
- Two-Piece Forged Truck
- King Pin
- King Pin Nut
- Ball Stud
- Ball Stud Nut
- Adjustable Washer
- You Provide Bushings/ Cushions, and Pivot Cups
- This is a SINGLE Truck set. You will need four to complete a skate.
$30.00
Add to cart
Superball Toe Stops
Toe Stop Features:
- 60mm footprint
- Non-marking, grippy natural rubber 73A
- Pre-angled bottom (zero break-in period)
- 26 mm stem or 10mm Stem
- Hollow forged aluminum stem
- Molded safety line indicates when rubber is nearly worn down to the stem
- American Imperial Standard Thread
$35.00
Select optionsThis product has multiple variants. The options may be chosen on the product page
Skate Shaped Bag
$35.00
Select optionsThis product has multiple variants. The options may be chosen on the product page
Tornado F1 Bearings
- Stainless Steel Balls
- Black Oxidized Races
- All steel bearings that are made of high-quality steel with oxidized races to create less friction and drag with better roll.
$39.95
Add to cart
Kwik Zenith
- Bearing Type: 608 8mm
- Dimension: 8mm core, 22 outer diameter, 7mm width
- Protection: Chrome steel races
- Cage: Delrin® retainers
- Quality: ABEC-9
- Ball complement: 7 pieces
- Ball Material: Alloy
$40.00
Add to cart
Bones Reds Bearings
- Bearing Type: 608 8mm or 607 7mm
- Dimension: 8x22x7
- Protection: ZZ
- Cage: SPCC 08F
- Quality: ABEC 7
- Ball complement: 7 pieces
- Ball Material: Steel
- Set of 16 Bearings
$40.00
Select optionsThis product has multiple variants. The options may be chosen on the product page